SDNR Type M, Type S
- Compact driver size
- The Driver size of the SDNR is less than one-third (1/3) the size of previous models,
allowing a size-efficient design for the fastening system's enclosure.
- High accuracy servo motor control
- A high speed CPU and improved software thchnology allows
for more precise servo motor control yielding a higher degree of fastening accuracy.
- Multi-axis control
- One (1) to thirty-two (32) units can be interfaced to one common controller.
Various fastening strategies and fastening sequences can be selected on a per unit basis.
- Enhanced system operation and response
- High-speed network communication is used to program settings,
acquire and display pertinent data,
and perform maintenance functions among,
other time-critical events.
- Wide variety of tightening strategies available
- Available standard fastening strategies include Torque Control with Angle Monitoring,
Torque-Turn, Torque Tension, and Yield Point Detection Control.
- Compact Multi-Controller (Type M) available
- Various communication interfaces are available with the use of the Multi-Controller.
These include discrete parallel I/O,
binary coded decimal output, serial (RS232C) I/O,
printer output, and Fieldbus (Device Net, Profibus, etc.) I/O.
- Advanced Flexibility and Expandability
- The SDNR Fastening System can be easily interfaced with other Sanyo products for data acquisition and machine control.
These products include, but are not limited to, the Smart Terminal, the User Interface Terminal for Windows, and CETOP.
- Support FMS (Flexible Manufacturing System)
- Eight (8) different fastening programs and thirty-two (32) diffrent fastening parameters can be pre-programmed for each connected unit.
This arrows selection on a cycle by cycle basis of different fastening speeds,
fastening sequences, fastening strategies, operating parameters, and output shaft direction of rotation.
- Reduced system wiring
- A flexible, reliable composite cable assembly is used resulting in a two cable wiring system between the driver and th spindle assembly.
Some previous models used a system comprised of three cables.
Nutrunner Display Panel
Features
- It is available for using Programmable Operator Panel to be connected with PLC or other external devices.
- Screen for user can be configured.
(The screen configuration software is necessary.)
- You can choice the model from 5.7 inches TFT color, STN color or STN monochrome according to cost or purpose.
(If you need large-screen model, please contact us.)
- It corresponds with multi language. At present, it corresponds with Japanese and English.
(Other language will be corresponded in the future.)
- Fastening data received from Nutrunner can forward to PLC.
- History of rejected cycles (NG cycles) can be saved in CF card or USB memory by CSV format.
|
 |
 |
Nutrunner Operation
- Connected Nutrunner Type S or M is selectable.
- Fastening setting of Nutrunner can be performed.
- End of cycle data can be displayed.
- Torque curve (maximum 4 spindles) can be displayed.
- History of fastening data can be displayed.
- It is provided with maintenance functions for torque, angle, and Nutrunner I/O check.
- It is provided with manual operating function of Nutrunner.
|
|
 |
Programmable Operator Interface
- It can also be used for Programmable operator interface with connecting to PLC. Both Nutrunner operation and Programmable operator interface function by one.
- Application software for configuring the screen for user is prepared.
|
|
 |
Options
|
Smart Terminal
The Smart Terminal is an enhanced variation of the Display panel.
Functions include system configuration (programming), data acquisition and display,
torque curve display and analysis, manual mode operation via a touch panel, and a multi-function display.
A more detailed brochure for this product is now under construction.
|
|
 |
|
User Interface Terminal
The User Interface Terminal is a tool useful for the initial configuration of a fastening system and
to aid in the quick determination and resolution of many fastening problems.
A software only variation can be used for installation on an existing portable or plant floor computer.
The target computer must run the Windows operating system.
Features
- System configuration (programming)
- fastening data acquisition
- Torque curve acquisition and display
- Reject(NG) data analysis
- Real time statifical reporting
- Manual operation
- Optional custom networking capabilities
*Sales only of software are also available
|
|
 |
Specifications
| Nutrunner Set Model |
Rated
Torque
(N.m) |
Torque Range
(N.m) |
Fastening
Accuracy |
| SDNR(TM1)-010SH |
SDNR(TS1)-010SH |
10.0 |
3.0-10.0 |
±2%
(3σ/Rated Torque) |
| SDNR(TM1)-010FH |
SDNR(TS1)-010FH |
| SDNR(TM1)-010S |
SDNR(TS1)-010S |
| SDNR(TM1)-010F |
SDNR(TS1)-010F |
| SDNR(TM1)-025S |
SDNR(TS1)-025S |
25.0 |
7.5-25.0 |
| SDNR(TM1)-025F |
SDNR(TS1)-025F |
| SDNR(TM2)-050S |
SDNR(TS2)-050S |
50.0 |
15.0-50.0 |
| SDNR(TM2)-050F |
SDNR(TS2)-050F |
| SDNR(TM2)-100S |
SDNR(TS2)-100S |
100 |
30-100 |
| SDNR(TM2)-100F |
SDNR(TS2)-100F |
| SDNR(TM3)-180S |
SDNR(TS3)-180S |
180 |
54-180 |
| SDNR(TM3)-180F |
SDNR(TS3)-180F |
| SDNR(TM3)-320S |
SDNR(TS3)-320S |
320 |
96-320 |
| SDNR(TM3)-320F |
SDNR(TS3)-320F |
| SDNR(TM3)-580S |
SDNR(TS3)-580S |
580 |
174-580 |
| SDNR(TM3)-580F |
SDNR(TS3)-580F |
Note:1N.m=0.102 kgf.m=0.738 ft.Lbs
Special Nutrunner also can be supplied.
